Step 1:After removing your blind from it's case, hold onto one of the 3 sets of steel rings and let the other 2 pop open.
Step 2:Unfold the Blind.
Step 3:Take hold of the corner, put your foot on the bottom section of the blind. Lift the top side up.
Step 4:Continue to lift the top of the blind over your head so you are standing on the inside when it opens.
COMPONENTS
INCLUDED:
8
-Tent Stakes
4
- High-Wind Tie-Down Ropes
1
- Camouflage Backpack
2
- Fiber Poles
Step 5:Included with your Doghouse Blind are 2 fiber-poles to arch the roof. To install these poles, simply insert one end of each pole into opposite pockets inside the blind. The pockets are located in all 4 corners of the Doghouse.
Doghouse Fold Down Instructions
Step 1:After you have removed the fiber-poles from the roof of the Doghouse Blind, take hold of one corner of the blind.
Step 2:Lay the Blind onto it's side and fold side over onto the other.
Step 3:Take hold of the top part of the blind at 10:00 and 2:00. Keep your knuckles up and your thumbs underneath.
Step 4:Roll the blind out away from your body as it begins to form a "U" shape.
Step 5: Once the blind has formed a "U" shape, remove one hand from the steel and rotate it 180 degrees. (Right hand counterclockwise or left hand clockwise). You can also rotate both hands. (Shown)
Step 6:Continue to roll the top of the blind over, while overlapping the two steel bands that are closest to your body.
Step 7:Tuck the top section under so it overlaps onto the bottom half of the blind.
Step 8:You will feel less tension now. You simply drop the rings to the ground.
Step 9:Now you can place the Doghouse Blind in it's
backpack carrying case.
