Step 1: After you have removed the fiber-poles from the roof of the Outhouse Blind. Take hold of one of the corners of the blind and lay the blind on its side.

Step 2: Fold one side over onto the other.

Step 3: Take hold of the top part of the blind at 10:00 and 2:00. Keep your knuckles up and your thumbs underneath.

Step 4: Roll the blind out away from your body. It will begin to form a “U” shape.

Step 5: Once the blind has formed a “U” Shape, remove one hand from the steel and rotate it 180 degrees. (Right hand counterclockwise or left hand clockwise) You can rotate both hands as shown.

Step 6: Continue to roll the top of the blind over while overlapping the 2 steel bands closest to your body.

Step 7: Tuck the top section under so it overlaps onto the bottom half of the blind.

Step 8: You will feel less tension now. Simply drop the rings to the ground then place the blind in it’s backpack carrying case.